Safety features should always be your top priority when you are buying a new water heater. Modern water heaters now include multiple layers of protection that manufacturers did not offer even ten or fifteen years ago. These protections can greatly reduce the risk of leaks, fires, explosions, scalding injuries and expensive water damage inside the home.
Below, this water heater replacement company in Des Plaines, Illinois is going to highlight some safety features that you should never overlook during the replacement process.
1. T&P valve
One of the most critical safety features on any water heater is the temperature and pressure relief valve, commonly known as the T&P valve. This valve automatically releases water when internal temperature or pressure exceeds safe limits.
A water heater can build up excessive pressure and fail violently without a functioning T&P valve. This can then lead to severe property damage or serious injuries.
2. Anti-scald protection
Water that is too hot can be just as dangerous as having no hot water at all. Anti-scald technology can regulate water temperature to prevent sudden spikes that could cause burns.
A good water heater replacement company in Des Plaines, Illinois can install systems with built-in temperature controls or thermostatic mixing valves. These devices mix hot and cold water to maintain a safer, more consistent temperature throughout the home.
3. Gas safety and automatic shutoff features
Fuel-related safety systems are critical for gas-powered water heaters. Modern gas water heaters use automatic gas shutoff mechanisms that stop gas flow when the burner flame goes out or when the system detects unsafe operating conditions.
Other features like flame arrestors and sealed combustion chambers can reduce fire hazards and prevent flammable vapors from igniting. Your local water heater replacement company can configure these elements to protect both the appliance and the home.
4. Leak detection and water damage prevention
Water heater leaks are very common and even small leaks can cause extensive damage if they go unnoticed for too long. Newer water heaters may include built-in leak detection sensors that alert homeowners or automatically shut the system down when the sensors detect water. You could need extra protective measures like floor sensors or automatic shutoff valves to further reduce the risk of water damage and costly repairs.
5. Electrical safety for electric and tankless units
Electric and tankless water heaters use advanced electrical systems, which makes built-in safety protections even more important. These built-in protections prevent overheating and reduce the risk of electrical damage or fire.
When you work with a qualified water heater replacement company in Des Plaines, Illinois, you can be assured that the company will install your system to meet all local electrical codes and confirm safe operation from day 1.
6. Venting and carbon monoxide protection
Proper venting is a critical safety requirement for gas water heaters because it safely directs exhaust gases out of the home. Inadequate or improper venting can lead to carbon monoxide buildup, which poses a potentially life-threatening health risk.
Modern water heaters have improved venting designs that increase efficiency and reduce the chance of dangerous exhaust backdrafting. A professional water heater replacement company can inspect venting systems during replacement to confirm that the system safely expels harmful gases from the home.
Looking for a water heater replacement company in Des Plaines, Illinois?
If you’re ready to consult with the most trusted water heater replacement company in Des Plaines, Illinois, look no further than R. Carrozza Plumbing Co. Our experienced technicians will help you decide whether a replacement is necessary. If you do need a new water heater, we will guide you toward the right option for your household and even install it if you want. Contact us today to schedule your water heater replacement consultation.